Codings available

- Enable consumption Km/L
- Tank Open Warning
- Disable Seat Belt Sound
- Remove Rear Belt Popup
- Fuel consumption display
- Instrument Cluster Tyre Bar
- SpeedWarning Off (Only Gulf Car)
- Adblue Level Graphics Permanent

---

Available variants

---

Gallery

- Amg Design 280 Km/h (Model 253Facelift Digital)
- Amg Design 330 Km/h (Model 253Facelift Digital)
- Setting CV Engine Data
- Enable AMG Boot Logo
- Amg Performance MBUX + Amg Startup Logo Mbux
- Amg Startup Logo Mbux

---

Available variants

---

Gallery

- Enable Adaptive high beam assistance system (Led Performance) > Only If Present One Of This Code: SA233, 243, 513 In Datacard

- Advanced Traffic Signs Recognition > Only If Present One Of This code: Sa243, Sa233 In Datacard

- Perimeter Alarm (Theft protection package)

---

Available variants

---

Gallery

- Dynamic Select Last Mode For W205
- Start&Stop Memory

---

Available variants

---

Gallery

Driving mode:
- Sport + (The car becomes more reactive, the accelerator pedal is more sensitive, the esp intervenes less and the gearbox tends to shift at higher revs.)
- Snow (Optimizes the accelerator response esp in order to make it less abrupt and express itself in a way that drives on icy or slightly snowy roads)
- Offroad (Optimize esp, acts on steering reduction and if available on 4Matic)
- Manual (Sets the gearbox to manual without timer switching to automatic on the selected driving mode)
- Curve (Acts on steering reduction, esp and adaptive suspension if available)
- Battery Level (Only For Electric/Hybrid Car)

BE CAREFUL: Sport+ is not compatible with hybrids models!

- Change Startup Drive Mode
Select in which driving mode you want to start your car.

---

Available variants

---

Gallery

- Clock View On Mbux
- Augmented Reality Camera With Permanent Function
- Augmented Reality Cam (Only Cars with code 21U Dashcam)
- Ambient Light Mbux
- Dynamic Seat Heating
- Energizing Comfort
- Mbux Engine Power In CV
- Mbux Wi-Fi Tethering
- Dashcam Automatic Registration
- Day Light On/Off Via Mbux

---

Available variants

---

Gallery

- Rear Position Light Always On (Model 2022+)

- Door Sills Up Light To Max (At Night

- Modded Number Lane Change Flashes

- Blue Welcome Light Time Extender > Only W213/W238 With Code 642 Multibeam

---

Available variants

---

Gallery

- Parallel Parking (Only 2021-2022) Car's

- Active Lane Change Assist Activation > ONLY FOR 2021-2022 WITH DRIVE ASSIST PACKAGE 23P (SA233)

- Lane Tracking Package 22P > POSSIBLE ONLY ON CARS WITH DATACARD CODE SA513.

- Unlock CPC VMax 250km/h

---

Available variants

---

Gallery

- Coming Home HeadLight (Low Beam)
- Personalize Horn at lock/unlock
- Engine Sound Via Speaker
- Stop Remote Software Update OTA

---

Available variants

---

Gallery

- Remove Exhaust Flap Error

---

Available variants

---

Gallery

Clear Error, Restart Module

---

Available variants

---

Gallery

This coding allows you to raise or lower the height of the suspension and the vehicle for a more aggressive look.
Various steps available to customize your car.

***PAY ATTENTION***
CODE POSSIBLE ONLY AIRMATIC SUSPENSION.

---

Available variants

---

Gallery

Add Code U62 in Your car for retrofit Door Sills illuminated.
WARNING: it is required to install the parts before doing the coding.
ATTENTION: Physical installation required

---

Available variants

---

Gallery

Adapts the SRS unit to accept the new Facelift steering wheel airbag.
With this coding it will not be necessary to modify wiring or insert resistors.

---

Available variants

---

Gallery

Active Distance Assist DISTRONIC can maintain the distance to the vehicle in front set by the driver and on the motorway or in stop-and-go traffic, for example, can reduce fatigue.

*PAY ATTENTION*
Before use this coding it's necessary change the steering buttons And Front Radar.

After coding it is necessary to calibrate the radar with the procedure "Front Radar Calibration".
Perform the coding, after the engine start message, drive for about 10 kilometers without disconnecting the PC and the OBD cable.
>>DO NOT TURN OFF THE ENGINE AFTER THE CODING COMPLETED MESSAGE>>

After approximately 10 kilometers the calibration successful message will be displayed on the dashboard.

**For Steering button purchase requests contact on Whatsapp/Telegram this number: +39 340 6868 093

---

Available variants

---

Gallery

- Convert SpeedoScale in Instrument
- Conversion FuelScale

---

Available variants

---

Gallery

Restore Original Coding

---

Available variants